-
-
-
Depending on the year of manufacture, the attachment points may differ slightly.
Front bumper
-open the hood.
-under the hood, unscrew the two screws and remove the radiator grill (the bottom is held by latches).
-from the bottom side, unscrew the eight screws (screwed from bottom to top).
-wheel the wheels to the side.
-in the wheel arches, Unscrew three screws on each side that secure the wheel arch liners (front part).
-Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.
-release the latches in the wings (pull the corners of the bumper towards you).
-release the latches in the opening between the headlights.
-with an assistant, we pull the bumper forward (look behind the wires and hoses).
-release the connectors of electrical equipment.
-disconnect the headlight washer hoses (if any, liquid may leak).
Rear bumper
-open the trunk lid.
-release the side trims of the trunk (open the plugs if any).
-for the skins, Unscrew the plastic nuts and remove the taillights.
-Unscrew the screws in the wheel arches that secure the wheel arch liners (rear).
-Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.
-Unscrew the screws that secure the bottom of the bumper (twisted from bottom to top).
-release the latches in the wings (pull the corners towards you).
-release the latches under the rear lights and in the trunk opening.
-with an assistant, we pull the bumper back (look behind the wires).
-we disconnect the connectors of the electrical equipment.
English 
Italiano 
Français 
русский 
Deutsch 
Español