Front bumper

To remove the front bumper needs to Jack “post the engine”, this puts between the engine and the Jack wooden block and raise so that the weight of the engine fell on the Jack.

-from under the car Unscrew two bolts on each side (only need to Unscrew the bolts indicated by the arrows).

-pulls the bumper from the guides themselves.

the scheme of fastening of the front bumper VW Golf 2 (Jetta 2)

Rear bumper

-from under the car Unscrew two bolts on each side (spun upwards).

-pulls the bumper back from the rails.

-diagram of rear bumper VW Golf 2 (Jetta 2)

diagram of rear bumper VW Golf 2 (Jetta 2)

the bumper is cleared.