Front bumper

-Unscrew the wheel to the left or right side, depending on which side of the bed will be dismantled.

-wheel arches Unscrew four screws on each side holding the fender liner to the bumper.

-open the hood and remove the radiator grill (upper part rests on the latch, the lower is inserted in the bumper). To remove the lever to open the hood, the grille can be deployed and throw-up.

-under the grille, Unscrew the bolts (three twisted from top to bottom and one on each side of the headlights).

-both sides of the bumper, remove the side grille and underneath Unscrew one bolt on each side.

-pulls the bumper from the guides themselves.

-remove the connectors from the duplicate of the direction indicators (if any).

the attachment of the front bumper VW Golf 4

the scheme of fastening of the front bumper VW Golf 4

Rear bumper

-wheel arches Unscrew the screws that attach the fender liner to the bumper (so as not to remove the wheels, use a ratchet with a nozzle).

-from the trunk, through hatches, Unscrew the nuts and remove the tail lights.

-under the rear lights Unscrew one bolt on each side (spun down).

-at the bottom of the car in the corners and in the middle Unscrew the three bolts (spun upwards).

-pulls the bumper back with the grooves (do it better two, so as not to scratch the paint on the wings).

-under the left tail lamp connector remove the license plate light.

-the bumper is cleared.

the attachment of the rear bumper VW Golf 4

diagram of rear bumper VW Golf 4