Front bumper

-under the hood, Unscrew one screw on each side near the headlights (spun down).

-Unscrew the wheel to the left or right side, depending on which side of the bed will be dismantled.

-wheel arches Unscrew the screws that attach the fender liner to the bumper.

-move the wing flaps to the side and Unscrew one screw on each side (spun up).

-Unscrew the screws around the perimeter at the bottom of the bumper (spun up).

-with the assistant pulls the corners of the bumper to the side and pulls it in front with the guides.

-you can now unplug the connectors from the fog lights (if any).

-remove connector from the PDC (if any).

- if there is paramilitary disconnect the hoses from the injectors and close them with stoppers that from the reservoir was leaking fluid.

the attachment of the front bumper VW Touran (after 2010)

the scheme of fastening of the front bumper VW Touran (after 2010)

Rear bumper

-Unscrew the screws in the wheel arches that secure the fender liner .

-move the wing flaps to the side and take out one piston on each side (inserted from the bottom up). In some models instead of caps can stand the bolts.

-Unscrew the screws at the bottom (spun up).

-with the assistant pulls edge out to the side and pulls the bumper from the guides ago.

-some models can stand bolts under the rear lights.

-remove connector from the PDC (if any).

the attachment of the rear bumper VW Touran (after 2010)

diagram of rear bumper VW Touran (after 2010)