-
-
-
The attachment points may differ depending on the year of manufacture.
Front bumper
-open the hood.
-under the hood, take out the rivets (inserted from top to bottom) that secure the upper part of the bumper (trim).
-take out the caps around the perimeter of the lower part of the bumper (inserted from bottom to top).
-turn the wheels to the side.
-in the wheel arches, Unscrew three screws on each side and release the wheel arch liners (front part).
-behind the wheel arch liners, Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.
-release the latches in the wings (pull the corners of the bumper towards you).
-with an assistant, we pull the bumper forward (we look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-in the trunk, we release the side trims (you need to get access to the back of the taillights).
-for the skins, Unscrew three nuts on each side and remove the taillights.
-under the rear lights, take out two pistons and unscrew the two screws.
-Unscrew the screws around the perimeter of the lower part that secure the protection.
-in the wheel arches, Unscrew two screws and take out one piston on each side that secure the wheel arch liners (rear part).
-Unscrew one screw at a time that secure the corners of the bumper to the fenders.
-we climb under the car and unscrew the four bolts that attach the metal amplifier to the body.
-release the latches in the wings (pull the corners towards you).
-with an assistant, we pull the bumper back (look behind the wires).
-disconnect the connectors of the electrical equipment.
English 
Italiano 
Français 
русский 
Deutsch 
Español