How to remove front and rear bumper Hyundai Tucson TL (2015+)
The attachment points may differ depending on the year of manufacture.
Front bumper
-open the hood.
-under the hood, take out the four pistons and unscrew the two screws that secure the upper part of the bumper (pad).
-Unscrew six screws along the perimeter of the lower part of the bumper (twisted from bottom to top).
-wheel the wheels to the side.
-in the wheel arches, take out three pistons on each side that secure the wheel arch liners (front part).
-Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.
-release the latches in the wings (pull the corners of the bumper towards you).
-with an assistant, we pull the bumper forward (look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-near the rear lights, remove the lining.
-behind the overlays, unscrew two screws on each side and remove the taillights (they are held on the latches).
-under the rear lights, take out two pistons on each side.
-take out the caps along the perimeter of the lower part (inserted from bottom to top).
-in the wheel arches, Unscrew three screws on each side that secure the wheel arch liners (rear part).
-Unscrew one screw at a time that secure the corners of the bumper to the fenders.
Then there are two options:
- (first) we climb under the car and unscrew the four bolts that attach the metal amplifier to the body (green arrows in the diagram).
- (second) release the latches in the wings (pull the corners towards you). Next, you need to pull off the side of the bumper, stick your hand into the opening and pull out one piston on each side (blue arrows) that attach the bumper to the metal amplifier.
-with an assistant, we pull the bumper back (look behind the wires).
-disconnect the connectors of the electrical equipment.
English 
Italiano 
Français 
русский 
Deutsch 
Español 
