How to remove front and rear bumper Hyundai i20 (2014+)

The attachment points may differ depending on the year of manufacture.

Front bumper

-open the hood.

-under the hood, take out the six rivets that secure the upper part of the bumper (lining).

-take out the caps from the bottom (inserted from bottom to top).

-turn the wheels to the side.

-in the wheel arches, take out three pistons on each side and release the wheel arch liners (front part).

-behind the wheel arch liners, Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.

-release the latches in the wings (pull the corners of the bumper towards you).

-release the latches under the headlights.

-with an assistant, we pull the bumper forward (we look behind the wires).

-disconnect the connectors of the electrical equipment (if any).

Rear bumper

-open the trunk lid.

-near the rear lights, remove the plastic pads (they are held on the latches, you need to pry them near the lights).

-under the overlays, unscrew two screws on each side and remove the taillights (they are held on the latches). The lower screws also secure the top of the bumper.

-take out six caps from the bottom side (inserted from bottom to top).

-in the wheel arches, Unscrew three screws on each side that secure the wheel arch liners (rear part).

-Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.

-behind the bumper, from the bottom side, Unscrew the four bolts that secure the bumper reinforcement to the body.

-release the latches in the wings (pull the corners towards you).

-with an assistant, we pull the bumper back (look behind the wires).

-snap together the connectors for license plate lighting, parking sensors and cameras (if any).

How to remove front and rear bumper for Hyundai i20 (2008-2014)