How to remove front and rear bumper Hyundai Coupe (Tiburon) (1998-2002)

Depending on the year of the attachment points are slightly different.

Front bumper

-open the hood.

-under the hood, take out nine of the caps that secure the upper part.

-Unscrew one screw on each side and remove the turn signal.

-in the opening turn indicators Unscrew one nut on each side that attach the bumper to the wings.

-on the perimeter in the bottom part Unscrew the screws and take out the caps.

-wrenched the wheel and removed the fender liner.

-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.

-with the assistant pulls the bumper forward.

-remove the connectors from the equipment (if any).

Rear bumper

-open the trunk lid.

-in the trunk and remove the rear side trim.

-behind the side panels Unscrew one screw and two nuts on each side that attach the bumper to the wings.

-from the trunk, Unscrew the nuts and remove the tail lights.

-take out the caps and Unscrew the screws in the opening of the trunk and under the taillights.

-on the perimeter in the bottom part Unscrew the screws and take out the caps.

-wheel arches, peel the fender liner.

-move the wing flaps to the side and Unscrew one screw on each side holding the corners of the bumper to the wings (if any).

-with the assistant release the bumper clips and gently pulls back.

-remove the electrical connectors (if any).

How to remove front and rear bumper Hyundai Coupe (Tiburon) (2002-2008)