Depending on the model year and body type of attachment may vary.

Front bumper

-open the hood.

-under the hood take out the rivets that secure the upper part.

-take out the caps on the perimeter at the bottom.

-wheel arches, peel the fender liner.

-the fender liner, Unscrew the screws (spun upwards) holding the corners of the bumper to the wings.

-assistant exempt corners of the latches in the wings and bumper pulls gently on yourself.

-remove connectors from electrical equipment.

the scheme of fastening of a forward bumper Hyundai H-1 (2007)

the scheme of fastening of wheel arches Hyundai H-1 (2007)

Rear bumper

-open the trunk lid.

-Unscrew two screws each side and remove the tail lights.

-wrenched screws, release latches and remove the fangs under the rear lights.

-Unscrew the screws in the opening of the trunk.

-Unscrew the screws around the perimeter at the bottom.

-in the wheel wells, Unscrew the screws and peel the fender liner.

-the fender liner, Unscrew the screws (spun upwards) holding the corners of the bumper to the wings

-with the assistant release the latch in the wings, and gently pulls the bumper itself.

-remove the electrical connectors (if any).

diagram of rear bumper Hyundai H-1 (2007)

scheme of fastening of tail light Hyundai H-1 (2007)