-
-
-
Front bumper
-open the hood.
-take out the rivets that secure the grille and the top part.
-on the perimeter in the lower part and pull out the caps.
-wrenched the wheel depending on which side we understand.
-wheel arches, peel the fender liner.
-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-with the assistant to the corners of the latches in the wings and pulls the bumper forward.
-remove the connectors from the equipment (if any).
Rear bumper
-open the trunk lid.
-from the trunk, Unscrew the nuts and remove the tail lights.
-the rear lights take out two pistons and Unscrew one screw on each side.
-Unscrew the screws and release the wing flaps in the wheel arches.
-Unscrew one screw on each side holding the bumper corners to the wings.
-on the perimeter in the lower part and pull out the caps.
-from under the car Unscrew the two screws on each side that attach the bumper reinforcement to the body.
-with the assistant release the latch in the wings, and gently pulls the bumper back.
-remove the electrical connectors (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español