How to remove front and rear bumper Hyundai i30 (2007-2012) (Elantra Touring)

Depending on the model year and body type of attachment may vary.

Front bumper

-under the hood take out the rivets that secure the upper part.

-take out the caps and Unscrew the screws (twisted and inserted from the bottom up) around the perimeter at the bottom.

-wheel arches, peel the fender liner.

-the fender liner, Unscrew the screws (spun upwards) holding the corners of the bumper to the wings.

-assistant exempt corners of the latches in the wings (pull on yourself) and gently pulls the bumper itself.

-remove connectors from electrical equipment.

Rear bumper

-open the trunk lid.

-Unscrew three screws on each side and remove the tail lights.

-take out the clips under the rear lights (inserted from the bottom up).

-Unscrew the screws in the opening of the trunk.

-Unscrew the screws and take out the caps on the perimeter at the bottom.

-wheel arches, peel the fender liner.

-the fender liner, Unscrew the screws (spun upwards) holding the corners of the bumper to the wings

-Unscrew the screws that secure the amplifier bumper to the body.

-with the assistant release the latch in the wings, and gently pulls the bumper itself.

-remove the electrical connector license plate light.

-remove connector from the PDC (if any).

How to remove front and rear bumper Hyundai i30 (2011-2017)

How to remove front and rear bumper Hyundai i30 (2016+)