Depending on the year of release of the attachment can vary.

Front bumper

-under the hood take out the six rivets that secure the trim over the grille.

-on the perimeter in the lower part and pull out the caps (inserted from the bottom up).

-wrenched the wheel depending on which way we will analyse it first.

-wheel arches, peel the fender liner.

-attach the fender liner to the side and Unscrew one screw on each side holding the bumper corners to the wings.

-with the assistant release the latch in the wings, and gently pulls the bumper itself.

-remove the connector from the fog lamp.

-remove connector from the PDC (if any).

the scheme of fastening of the front bumper the Hyundai Veloster

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-open the trunk lid.

-Unscrew two screws each side and remove a rear lights.

-the rear lights take out the caps.

-Unscrew the screws in the opening of the trunk.

-the perimeter in the lower part and pull out the caps that secure the lower part (inserted from the bottom up).

-in the wheel wells, Unscrew the screws (to remove the wheels easier to turn a ratchet with a nozzle) that attach the fender liner.

-Unscrew one screw on each side that attach the bumper corners to the wings.

-under the car, Unscrew the screws holding the amplifier bumper to the body.

-with the assistant release the latch in the wings and pulls the bumper back.

-remove the connectors from the sensors (if any).

the scheme of fastening the rear bumper of the Hyundai Veloster

scheme of fastening of tail light Hyundai Veloster

the scheme of fastening the rear bumper of the Hyundai Veloster