-
-
-
Depending on the model year and body type of attachment may vary.
Front bumper
-open the hood.
-under the hood, Unscrew the screws and take out the rivets that secure the radiator grill and the upper part of the bumper.
-Unscrew the screws from the bottom side (twisted from bottom to top).
-wheel the wheels (depending on which side we will disassemble).
-in the wheel arches, release the wheel arch liners (front part).
-behind the wheel arch liners, Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.
-release the latches in the wings (pull the corners of the bumper towards you).
-with an assistant, we pull the bumper forward (we look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-in the trunk, remove the rear and release the side trims.
-for the skins, Unscrew three nuts on each side and remove the taillights.
-under the rear lights, unscrew one screw and take out one piston on each side.
-behind the side skins, on the inside of the fenders, unscrew the nuts and screws that secure the sides of the bumper.
-in the wheel arches, Unscrew the screws that secure the wheel arch liners (rear part) and the corners of the bumper to the fenders.
-Unscrew the four screws that secure the bumper reinforcement to the body.
-release the clips in the wings (pull the corners of the bumper down and towards ourselves).
-with an assistant, we pull the bumper back (look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español