How to remove front and rear bumper Hyundai i10 PA (2007-2014)

The attachment points may differ depending on the year of manufacture.

Front bumper

-open the hood.

-under the hood, take out the caps and Unscrew the screws (twisted and inserted from top to bottom) that secure the upper part of the bumper (radiator grille).

-take out the caps and unscrew the screws from the bottom side (twisted and inserted from the bottom up).

-wheel the wheels (depending on which side we will disassemble).

-in the wheel arches, release the wheel arch liners (front part).

-behind the wheel arch liners, Unscrew one screw on each side (twisted from bottom to top) that secure the sides of the bumper to the fenders.

-release the latches in the wings (pull the corners towards you).

-with an assistant, we pull the bumper forward (look behind the wires).

-disconnect the connectors of the electrical equipment (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew three screws on each side and remove the taillights.

-under the rear lights, unscrew the screws and take out the caps.

-take out six caps from the bottom side.

-in the wheel arches, Unscrew the screws that secure the wheel arch liners (rear part).

-Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.

-from the bottom side, Unscrew the four screws that secure the bumper reinforcement to the body.

-release the latches in the wings (pull the corners towards you).

-with an assistant, we pull the bumper back (look behind the wires).

-disconnect the connectors of the electrical equipment (if any).

How to remove front and rear bumper Hyundai i10 (2014+)