How to remove front and rear bumper Hyundai Kona

Front bumper

-open the hood.

-under the hood, Unscrew the four screws that secure the top of the bumper.

-take out the eight caps (inserted from bottom to top) at the bottom of the bumper.

-turn the wheels to the side.

-take out three pistons on each side and release the wheel arch liners (front part).

-Unscrew one screw on each side that secure the corners of the bumper to the fenders.

-release the latches in the wings (pull the corners of the bumper towards you).

-with an assistant, we pull the bumper forward (look behind the wires).

-disconnect the connectors of the electrical equipment (if any).

Rear bumper

-open the trunk lid.

-Unscrew two screws on each side and remove the taillights (they are held on the latches).

-in the opening of the trunk, Unscrew the screws that secure the upper part.

-take out the caps along the perimeter of the lower part (inserted from bottom to top).

-in the wheel arches, take out the caps and unscrew the screws (so as not to remove the wheels, take the ratchet with a nozzle) that secure the wheel arch liners (rear part).

-Unscrew the screws that secure the corners of the bumper to the fenders.

-we climb under the car and unscrew the bolts that attach the metal amplifier to the body.

-release the latches in the wings (pull the corners towards you).

-with an assistant, we pull the bumper back (look behind the wires).

-disconnect the connectors of the electrical equipment.