How to remove front and rear bumper Hyundai Trajet

Depending on the year of release of the attachment can vary.

Front bumper

-open the hood.

-Unscrew the screws that secure the top.

-Unscrew one screw on each side and take out on himself the direction indicators.

-Unscrew three screws on each side and remove the headlights.

-in the opening of the headlight and pull out the caps and Unscrew the nuts (holding the bumper to the wings).

-Unscrew the perimeter at the bottom of the screws and take out the caps.

-wrenched the wheel depending on which way we will analyse it first.

-wheel arches take out the rivets and removed the fender liner.

-for wheel arch liners Unscrew one screw on each side that attach the angles to the wings.

-with the assistant gently pulls the bumper itself.

-remove the connector from the fog lamp.

Rear bumper

-open the trunk lid.

-in the opening of the trunk, take out the clips that secure the upper part.

-Unscrew the screws and take out the caps on the perimeter at the bottom.

-from under the car, Unscrew the screws holding the amplifier bumper to the body.

-in the wheel wells, Unscrew the screws and take out the caps (not to remove the wheels to conveniently turn the ratchet with the extension).

-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-with the assistant release the latch in the wings and pulls the bumper back.

-remove the connectors from the equipment (if any).