Depending on the year of release of the attachment can vary.
-under the hood, take out the three clips (inserted from top to bottom) that secure the upper part.
-on the perimeter in the lower part and pull out the caps (inserted from the bottom up).
-wrenched the wheel depending on which way we will analyse it first.
-wheel arches, peel the fender liner.
-attach the fender liner to the side and Unscrew one screw on each side holding the bumper corners to the wings.
-with the assistant release the latch in the wings, and gently pulls the bumper itself.
-remove the connector from the fog lamp.
-open the trunk lid.
-Unscrew two screws each side and remove the tail lights.
-the rear lights take out two pistons on each side.
-in the opening of the trunk pulls out six caps and Unscrew two screws.
-the perimeter in the bottom part pulls out five caps.
-wheel arches Unscrew three screws on each side (to remove the wheels to conveniently turn the ratchet with a nozzle) that attach the fender liner.
-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-with the assistant release the latch in the wings and pulls the bumper back.
-remove the connectors from the sensors (if any).