Front bumper

-open the hood.

-under the hood, Unscrew the screws and take out the pistons, remove the pads above the radiator grille.

-Unscrew the screws and take out the rivets that secure the upper part of the bumper and the grille.

-on the perimeter in the lower part and pull out the caps.

-wrenched the wheel depending on which side we understand.

-wheel arches, peel the fender liner.

-the fender liner, Unscrew the screws (spun upwards) holding the corners of the bumper to the wings.

-assistant exempt corners of the latches in the wings and bumper pulls gently on yourself.

-remove connectors from electrical equipment.

the scheme of fastening of a forward bumper Hyundai Grandeur (Azera) (after 2011)

scheme of fastening of the radiator grille Hyundai Grandeur (Azera) (after 2011)

the scheme of fastening of a forward bumper Hyundai Grandeur (Azera) (after 2011)

the scheme of fastening of a forward bumper Hyundai Grandeur (Azera) (after 2011)

Rear bumper

-open the trunk lid.

-in the trunk behind the side panels Unscrew the nuts and remove the tail lights.

-the rear lights take out the caps and Unscrew the screws in the opening of the trunk.

-in the wheel wells, Unscrew the screws holding the wheel arches and the corners of the bumper to the body.

-for lazim under the car and Unscrew the screws holding the amplifier bumper to the body.

-take out the caps on the perimeter at the bottom.

-with the assistant release the latch in the wings, and gently pulls the bumper itself.

-remove the electrical connectors.

scheme of fastening of tail light Hyundai Grandeur (Azera) (after 2011)

diagram of rear bumper Hyundai Grandeur (Azera) (after 2011)

diagram of rear bumper Hyundai Grandeur (Azera) (after 2011)

diagram of rear bumper Hyundai Grandeur (Azera) (after 2011)

diagram of rear bumper Hyundai Grandeur (Azera) (after 2011)