-
-
-
The attachment points may differ depending on the year of manufacture and type of model.
Front bumper
-open the hood.
-under the hood, Unscrew the four screws that secure the top of the bumper.
-Unscrew the screws and remove the headlights.
-in the opening of the headlights, take out the caps (unscrew the nuts, depending on the year).
- (if any) take out the caps in the lower grille.
-Around the perimeter of the lower part of the bumper, take out the caps.
-turn the wheels to the side.
-in the wheel arches, Unscrew the screws that secure the wheel arch liners (front part).
-behind the wheel arch liners, Unscrew the screws that secure the sides of the bumper to the fenders.
-with an assistant, we pull the bumper forward (we look behind the wires).
-we disconnect the connectors of the electrical equipment.
Rear bumper
-open the trunk lid.
-Unscrew the screws and remove the taillights.
-Unscrew the screws in the trunk opening.
-remove the rear and side trunk trims.
-Unscrew the screws behind the skins.
-Unscrew the screws from the bottom side (twisted from bottom to top).
-in the wheel arches, Unscrew the screws that secure the wheel arch liners (rear part).
-Unscrew the screws that secure the sides of the bumper to the fenders.
-Unscrew the screws that secure the bumper reinforcement to the body.
-with an assistant, we pull the bumper back (look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español