Depending on the model year and body type of attachment may vary.
Front bumper
-under the hood, Unscrew one screw on each side and pulls himself on the turn (holding very tight).
-Unscrew four screws and remove the headlight.
-under the lights Unscrew the nuts and screws.
-Unscrew the screws in front of the radiator (twisted upside down).
-Unscrew the perimeter in the lower part of the endless screws.
-wrenched the wheel depending on which way we will analyse it first.
-wheel arches Unscrew three screws on each side.
-with the assistant gently pulls the bumper itself.
-remove the connector from the fog lamp.
Rear bumper
-open the trunk lid.
-Unscrew the aperture PI two screws on each side and remove the tail lights.
-take out the clips under the rear lights.
-take out the caps in the opening of the trunk.
-in the wheel wells, Unscrew the screws and take out the caps (not to remove the wheels to conveniently turn the ratchet with the extension).
-Unscrew the screws and take out the caps on the perimeter at the bottom.
-with an assistant, carefully pull back on the corners to the sides and pulls the bumper from the guides ago.
-remove the connectors from the equipment (if any).