-
-
-
The attachment points may differ depending on the year of manufacture and the type of body.
Front bumper
-open the hood.
-under the hood, take out the six rivets (inserted from top to bottom) that secure the upper part of the bumper (trim).
-take out the caps (inserted from bottom to top) at the bottom of the bumper.
-wheel the wheels to the side.
-in the wheel arches, take out three pistons on each side and release the wheel arch liners (front part).
-behind the wheel arch liners, Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.
-release the latches in the wings (pull the corners of the bumper towards you).
-with an assistant, we pull the bumper forward (we look behind the wires).
-disconnect the connectors of the electrical equipment.
Rear bumper
-open the trunk lid.
-remove the lining near the taillights.
-in the opening of the trunk, unscrew two screws on each side and remove the taillights (they are held by the latches).
-under the rear lights, unscrew the screws and take out the caps.
-from the bottom, take out the caps and unscrew the screws.
-in the wheel arches, Unscrew the screws that secure the wheel arch liners and bumper corners to the fenders.
-behind the bumper, from the bottom side, Unscrew the bolts that secure the bumper amplifier to the body.
-release the latches in the wings (pull the corners towards you).
-with an assistant, we pull the bumper back (look behind the wires).
-disconnect the connectors of the electrical equipment.
English 
Italiano 
Français 
русский 
Deutsch 
Español