How to remove front and rear bumper Hyundai Coupe (Tiburon) (2002-2008)

Depending on the year of the attachment points are slightly different.

Front bumper

-open the hood.

-Unscrew the screws and take out the pistons, remove the plate.

-Unscrew three screws on each side and remove the headlights.

-under the headlights, take out the caps.

-on the perimeter in the bottom part Unscrew the screws and take out the caps.

-wrenched the wheel depending on which side we understand.

-in the wheel wells, Unscrew the screws and peel the fender liner.

-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-with the assistant pulls the bumper forward.

-remove the connectors from the equipment (if any).

Rear bumper

-open the trunk lid.

-in the side panels of the trunk, Unscrew the clamps and open the hatches.

-in lyuchky Unscrew the nuts that attach the rear lights and the two nuts and two screws each side that attach the bumper to the wings.

-Unscrew the ten screws in the opening of the trunk and under the taillights.

-Unscrew the screws in the wheel arches.

-on the perimeter in the bottom part Unscrew the screws.

-wheel arches, peel the fender liner.

-move the wing flaps to the side and Unscrew one screw on each side holding the corners of the bumper to the wings (if any).

-with the assistant release the bumper clips and gently pulls back.

-remove the electrical connectors (if any).

How to remove front and rear bumper Hyundai Coupe (Tiburon) (1998-2002)