-
-
-
The attachment points may differ depending on the year of manufacture.
Front bumper
-open the hood.
-under the hood, take out the caps and unscrew the screws that secure the upper part of the bumper (trim).
-take out the caps and unscrew the screws from the bottom side (twisted and inserted from the bottom up).
-wheel the wheels to the side.
-in the wheel arches, release the wheel arch liners (front part).
- behind the wheel arch liners, Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.
-release the latches in the wings (pull the corners of the bumper towards you).
-release the latches under the headlights.
-with an assistant, we pull the bumper forward (we look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk, unscrew two screws on each side and remove the taillights (they are held by the latches).
-under the rear lights, unscrew the two screws and take out the four pistons.
-take out six caps from the bottom side (inserted from bottom to top).
-in the wheel arches, Unscrew two screws on each side that secure the wheel arch liners (rear part).
-Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.
-behind the bumper, from the bottom side, unscrew the four bolts that secure the amplifier to the body.
-release the latches in the wings (pull the corners towards you).
-with an assistant, we pull the bumper back (look behind the wires).
-disconnect the license plate lighting connectors.
English 
Italiano 
Français 
русский 
Deutsch 
Español