How to remove front and rear bumper Hyundai H-1 (Starex) (1996-2007)

Depending on the model year and body type of attachment are different.

Front bumper

-open the hood.

-under the hood, unscrew the screws that secure the upper part of the bumper (radiator grille).

-take out the caps and unscrew the screws from the bottom side (twisted and inserted from the bottom up).

-Unscrew the screws behind the license plate (depending on the year, it may not be).

-wheel the wheels (depending on which side we will disassemble).

-in the wheel arches, release the wheel arch liners (front part).

-behind the wheel arch liners, Unscrew two screws on each side that secure the sides of the bumper to the fenders.

-release the latches in the wings.

-with an assistant, we pull the bumper forward (we look behind the wires).

-disconnect the connectors of the electrical equipment (if any).

front bumper attachment points Hyundai H-1 (Starex) (1996-2007)

the scheme of fastening of the front bumper the Hyundai H-1 (1996-2007)

the scheme of fastening of the front bumper the Hyundai H-1 (1996-2007)

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-open the trunk lid.

-in the opening of the trunk, Unscrew the screws.

-take out the caps and unscrew the screws from the bottom side.

-from the trunk we release the clips that attach the sides of the bumper to the wings.

-with an assistant, we pull the bumper back (look behind the wires).

-disconnect the connectors of the electrical equipment (if any).

rear bumper attachment points Hyundai H-1 (Starex) (1996-2007)

diagram of rear bumper for Hyundai H-1 (1996-2007)

diagram of rear bumper for Hyundai H-1 (1996-2007)

 

How to remove front and rear bumper Hyundai H-1 (Starex) (2007)