Front bumper

-open the hood.

-take out the caps and Unscrew the screws that attach the top part of the bumper.

-take out the caps on the perimeter at the bottom.

-wheel arches, peel the fender liner.

-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-assistant free the bumper from the clips in the wings and under the headlights, pulls gently on yourself.

-remove connectors from electrical equipment.

the scheme of fastening of a forward bumper Hyundai ix55 (Veracruz)

the scheme of fastening of wheel arches Hyundai ix55 (Veracruz)

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-open the trunk lid.

-in the opening of the trunk, Unscrew the screws and remove the tail lights.

-the rear lights take out the caps.

-take out the caps at the bottom.

-in the wheel wells, Unscrew the screws and peel the fender liner.

-the fender liner, Unscrew the screws (spun upwards) holding the corners of the bumper to the wings

-(if necessary) Unscrew the screws that secure the amplifier bumper to the body.

-with the assistant release the latch in the wings, and gently pulls the bumper itself.

-remove connector from the PDC (if any).

diagram of rear bumper for Hyundai ix55 (Veracruz)

scheme of fastening of tail light Hyundai ix55 (Veracruz)