-
-
-
Depending on the year of release of the attachment can vary.
Front bumper
-open the hood.
-Unscrew three screws on each side and remove the headlights.
-Unscrew the screws and take out the rivets that secure the upper part of the bumper.
-Unscrew the screws in the Central part.
-on the perimeter in the lower part and pull out the caps.
-wrenched the wheel depending on which way we will analyse it first.
-wheel arches vacated lockers and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-with the assistant gently pulls the bumper itself.
-remove the connector from the fog lamp.
Rear bumper
-open the trunk lid.
-Unscrew the four nuts on each side and remove the tail lights
-the rear lights take out the caps (inserted upside down).
-take out the caps in the opening of the trunk.
-take out the caps on the perimeter in the lower part (inserted from the bottom up).
-wheel arches take out the rivets and removed the fender liner.
-Unscrew the screws (spun upwards) holding the corners of the bumper to the wings.
-with the assistant gently pulls the bumper itself.
-remove the connectors from the equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español