Depending on the year the site of attachment may vary slightly.

Front bumper

-open the hood.

-(if you have headlight washers) pull the injector up, unclench your ears and remove the caps.

-Unscrew the two screws and take out the five caps (twisted and inserted top to bottom) that secure the upper part.

-on the perimeter in the bottom part pulls out seven caps.

-wheel arches vacated lockers and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-assistant free the bumper from the clips in the wings and pulls gently on yourself.

-remove connectors from electrical equipment.

the scheme of fastening of headlight washer system Santa Fe 2 (2006-2012)

the scheme of fastening of the front bumper Hyundai Santa Fe 2 (2006-2012)

the scheme of fastening of the front bumper Hyundai Santa Fe 2 (2006-2012)

the scheme of fastening of the front bumper Hyundai Santa Fe 2 (2006-2012)

Rear bumper

 

-open the trunk lid.

-in the opening of the trunk, Unscrew one screw on each side.

-Unscrew the four screws at the bottom.

-in the wheel wells, Unscrew the screws and take out the rivets that attach the fender liner and splash guards (to remove the wheels, remove the ratchet with a nozzle).

-the fender liner, Unscrew the screws (spun upwards) holding the corners of the bumper to the wings

-with the assistant release the latch in the wings and under the tail lamps.

-gently pulls the bumper itself.

-remove connector from the PDC (if any).

the scheme of fastening of the rear bumper Hyundai Santa Fe 2 (2006-2012)

the scheme of fastening of the rear bumper Hyundai Santa Fe 2 (2006-2012)