Depending on the model year and body type of attachment may vary.
-under the hood take out the caps and Unscrew the screws that attach the grille and the upper bumper section.
-take out the caps on the perimeter at the bottom.
-wheel arches, peel the fender liner.
-the fender liner, Unscrew the screws (spun upwards) holding the corners of the bumper to the wings.
-assistant free the bumper from the clips in the wings and under the headlights.
-pulls gently on the bumper itself.
-remove connectors from electrical equipment.
-open the trunk lid.
-in the side panels of the trunk opening hatches (to gain access to the rear part of the rear lights).
-Unscrew the four nuts on each side and remove the tail lights.
-take out the clips under the rear lights (inserted from the bottom up).
-Unscrew the screws in the opening of the trunk.
- take out the caps at the bottom.
-in the wheel wells, Unscrew the screws and peel the fender liner.
-the fender liner, Unscrew the screws (spun upwards) holding the corners of the bumper to the wings
- Unscrew the screws that secure the amplifier bumper to the body.
-with the assistant release the latch in the wings, and gently pulls the bumper itself.
-remove connector from the PDC (if any).