-
-
-
Depending on the year of the body style and country of manufacturer of the attachment may vary.
Front bumper
-open the hood.
-under the hood, Unscrew the screws and take out the clips that secure the grille and the upper bumper section.
-take out the caps (inserted from the bottom up) that secure the lower part.
-wrenched the wheel depending on which way we will analyse it first.
-wheel arches vacated lockers and Unscrew one screw on each side (spun up), holding the corners of the bumper to the wings.
-with the assistant release the latch in the wings and under the headlights.
-gently pulls the bumper itself.
-remove the connector from the fog lamp.
-remove connector from the PDC (if any).
Rear bumper
-open the trunk lid.
-the side panels open stub.
-for plugs, Unscrew four nuts on each side and remove the tail lights.
-take out the clips under the rear lights and opening boot.
-in the wheel wells, Unscrew the screws and peel the fender liner (not to remove the wheels to conveniently turn the ratchet with the extension).
-the fender liner, Unscrew the screws (spun upwards) holding the corners of the bumper to the wings.
-climb up under the car and Unscrew two screws on each side that attach the bumper reinforcement to the body.
-with the assistant release the latch in the wings, and gently pulls the bumper itself.
-remove the connectors from the equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español