-
-
-
The attachment points may differ depending on the year of manufacture.
Front bumper
-open the hood.
-under the hood, take out the six rivets that secure the upper part of the bumper (lining).
-take out the caps from the bottom (inserted from bottom to top).
-wheel the wheels (depending on which side we will disassemble).
-in the wheel arches, take out three pistons on each side and release the wheel arch liners (front part).
-behind the wheel arch liners, Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.
-release the latches in the wings (pull the corners of the bumper towards you).
-release the latches under the headlights (pull towards yourself).
-with an assistant, we pull the bumper forward (we look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-in the side trims of the trunk, open the hatches.
-behind the hatches, unscrew three nuts on each side and remove the taillights (they are held on the latches).
-under the rear lights, unscrew one screw and take out one piston on each side.
-in the wheel arches, Unscrew four screws on each side that secure the wheel arch liners (rear part) and the corners of the bumper to the fenders.
-take out the caps at the bottom (inserted from bottom to top).
-release the clips in the wings (pull the corners of the bumper down towards you).
-with an assistant, we pull the bumper back (look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español