The attachment points may differ depending on the year of manufacture.
Front bumper
-open the hood.
-under the hood, take out the four pistons (inserted from top to bottom) that secure the upper part of the bumper.
-take out the caps and unscrew the screws from the bottom side (twisted and inserted from the bottom up).
-wheel the wheels to the side.
-in the wheel arches, release the wheel arch liners (front part).
-Unscrew one screw on each side (twisted from bottom to top) that secure the corners of the bumper to the fenders.
-release the latches in the wings (pull the corners towards you).
-with an assistant, we pull the bumper forward (we look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk, unscrew two screws on each side and remove the taillights (they are held by the latches).
-under the rear lights, unscrew the two screws and take out the two pistons.
-take out the caps from the bottom side.
-in the wheel arches, Unscrew three screws on each side that secure the wheel arch liners (rear part) and the sides of the bumper.
-from the bottom side, from the back of the bumper, unscrew the four screws that secure the amplifier to the body.
-release the latches in the wings (pull the corners towards you).
-with an assistant, we pull the bumper back (look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
How to remove front and rear bumper Hyundai i10 PA (2007-2014)