Depending on the year of release of attachment is different.
Front bumper
-under the hood, take out the clips that secure the trim over the grille and headlights.
-under the pickguard, Unscrew the screws and take out the clips that secure the grille and the upper bumper section.
-on the perimeter in the lower part and pull out the caps.
-wrenched the wheel depending on which side we understand.
-wheel arches, peel the fender liner.
-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-with the assistant to the corners of the latches in the wings and pulls the bumper forward.
-remove connectors from electrical equipment.
-if you have headlight washers, disconnected the hoses (liquid may be ejected from the washer fluid reservoir).
Rear bumper
-in the trunk, Unscrew the nuts and move on yourself to remove the tail lights.
-under the rear lights, Unscrew the screws that secure the top.
-free lockers in the wheel arches.
-Unscrew one screw on each side holding the bumper corners to the wings.
-from under the car, Unscrew the screws holding the amplifier bumper to the body.
-with the assistant release the latch in the wings, and gently pulls the bumper itself.
-remove the electrical connectors (if any).