-
-
-
Front bumper
-open the hood.
-take out the caps and remove the strip over the grille.
-Unscrew the screws and remove the headlamp.
-Unscrew the screws and take out the clips under the panel grille opening and headlights.
-on the perimeter in the bottom part Unscrew the screws and take out the caps.
-wrenched the wheel depending on which side we understand.
-in the wheel wells, Unscrew the screws and release the fender liner.
-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-take out the caps in the lower grille.
-with the assistant pulls the bumper forward.
-remove the connectors from the equipment (if any).
Rear bumper
-open the trunk lid.
-Unscrew the screws and remove Luggage compartment trim (need to access the rear part of the rear lights).
-Unscrew the nuts and remove the tail lights.
-take out the clips under the rear lights and opening boot.
-Unscrew the screws and release the wing flaps in the wheel arches.
-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-on the perimeter in the lower part and pull out the caps.
-with the assistant gently pulls the bumper back.
-remove the electrical connectors (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español