-
-
-
Front bumper
-open the hood.
-under the hood, Unscrew the screws and take out the rivets that secure the upper part.
-Unscrew the screws and remove the headlamp.
-under the lights, Unscrew the screws in the junction with the wings and release the latch.
-wrenched the wheel depending on which way we understand.
-in the wheel wells, Unscrew the screws and take out the rivets that secure the lining of the wings.
-we release the lining of the latches.
-Unscrew the screws under the pads.
-Unscrew one screw on each side (twisted side of the engine compartment) holding the corners of the bumper to the wings.
-Unscrew the screws (spun up) that secure the lower part.
-remove the license plate with the frame.
-under the license plate, Unscrew the two screws.
-release the latch and gently pulls the bumper forward with the assistant.
-snap together the connectors of electrical equipment.
Rear bumper
English 
Italiano 
Français 
русский 
Deutsch 
Español