-at the bottom, Unscrew the screws and remove the protection.
-take out the caps and Unscrew the screws around the perimeter at the bottom.
-for convenience wrenched the wheel depending on which way we will analyse it first.
-wheel arches Unscrew the screws.
-Unscrew two screws on each side (spun upwards) holding the corners of the bumper to the wings.
-under the hood take out the rivets and remove the plate.
-under the pickguard, Unscrew the screws.
-with the assistant release the clips under the headlights and gently pulls the bumper itself.
-remove the connector from the fog lamp (if any).
-remove connector from the PDC (if any).
-open the trunk lid.
-in the trunk, Unscrew the screws and nuts.
-Unscrew the screws in the wheel arches (so as not to remove the wheels easier to turn a ratchet with a nozzle).
-take out the rivets that attach the lower part.
-remove the plastic cover in the opening of the trunk.
-under the trim, Unscrew the screws and take out the caps.
-with the assistant gently pulls the bumper back.
-snap together the connectors of the equipment (if any).