Depending on the model year and body type of attachment are different.

Front bumper

-wrenched the wheel, depending on which side we understand.

-in the wheel wells, Unscrew the screws holding the wheel arch liners and lining of wings.

-attach the fender liner to the side and Unscrew from the inside in the lower part one screw on each side that secure the lining of the wings to the bumper.

-attach the linings of the wings to the side and Unscrew two screws on each side that attach the bumper to the wings.

-remove the license plate with the frame.

-under the license plate take out the plugs and Unscrew the two screws.

-(since 2006) open hood and Unscrew the screws that secure the top and the grille.

-Unscrew the screws (spun up) that secure the lower part.

- gently pulls the bumper forward with the assistant.

-remove the connectors from the fog lights (if any).

the attachment of the front bumper of the Ford Tourneo/Transit Connect (2002-2013)

the scheme of fastening of the front bumper of the Ford Tourneo/Transit Connect (2002-2013)

the scheme of fastening of the front bumper of the Ford Tourneo/Transit Connect (2002-2013)

Rear bumper

-from the inside, in the area of the wheel arch, release two metal round clip on each side.

-under the car Unscrew the two nuts that attach the bumper to the body.

-with the assistant pulls the bumper back.

the attachment of the rear bumper of the Ford Tourneo/Transit Connect (2002-2013)

the scheme of fastening the rear bumper of the Ford Tourneo/Transit Connect (2002-2013)

the scheme of fastening the rear bumper of the Ford Tourneo/Transit Connect (2002-2013)