Depending on the model year and body type of attachment are different.

Front bumper

-open the hood.

-under the hood, Unscrew the four screws and take out the two pistons that secure the top of the bumper.

-Unscrew seven screws along the perimeter of the lower part of the bumper and take out three pistons (twisted and inserted from bottom to top).

-wheel the wheels to the side.

-in the wheel arches, Unscrew the screws that secure the wheel arch liners (front part)

-behind the wheel arch liners, Unscrew one screw on each side that secure the corners of the bumper to the fenders.

-release the latches in the wings (pull the corners of the bumper towards you and down).

-with an assistant, we pull the bumper forward (we look behind the wires).

-disconnect the connectors of the electrical equipment.

the scheme of fastening of the front bumper of the Ford Taurus (2010)

Rear bumper

-open the trunk lid.

-remove the rear trunk trim.

-the luggage compartment trim, Unscrew the nuts.

-in the wheel arches, Unscrew the screws that secure the wheel arch liners (rear part).

-behind the wheel arch liners, Unscrew one screw on each side that secure the corners of the bumper to the fenders.

-Around the perimeter of the lower part of the bumper, take out the clips (inserted from bottom to top).

-release the clips in the wings (pull the corners towards you and down).

-release the latches under the rear lights.

-with an assistant, we pull the bumper back (look behind the wires).

-disconnect the connectors of the electrical equipment (if any).

the scheme of fastening the rear bumper of the Ford Taurus (2010)