How to remove front and rear bumper Ford Thunderbird (2002-2005)

Front bumper

-open the hood.

-under the hood, Unscrew the screws that secure the top.

-Unscrew the screws and remove the headlamp.

-wheel arches Unscrew the screws that attach the fender liner.

-Unscrew the screws that attach the bumper to the wings.

-Unscrew the screws and take out the caps (twisted and inserted from the bottom up) that secure the lower part.

-we release the latch in the wings (pull the corners themselves), and gently pulls the bumper forward with the assistant.

-snap together the connectors of electrical equipment.

Rear bumper

-wheel arches Unscrew three screws on each side (to remove the wheels easier to turn the ratchet with the extension).

-perimeter of the lower part and pull out the caps (inserted from the bottom up).

-open the trunk lid.

-in the trunk remove the plastic cover of the rear panel.

-for the trim, Unscrew the fastener bumper to the body.

-we release the latch in the wings (pull the corners to the sides), and gently with the assistant pulls the bumper back.

-remove the connectors from the equipment (if any).