-open the hood.
-under the hood, Unscrew the four screws that secure the top.
-at the bottom, Unscrew the three screws (spun up).
-depending on hand wrenched up to the stop wheel.
-wheel arches Unscrew three screws on each side holding the fender liner to the bumper.
-with an assistant, carefully, so as not to break the wire, pulls the bumper forward.
-remove the connectors from the fog lights.
-remove the connector from the temperature sensor (if any).
-remove the connector from the Parking assist sensors (if any).
-open the trunk lid.
-we release the lower part of the gasket.
-under the tail lights remove the cover.
-under the covers, Unscrew the screws.
-in the wheel wells, Unscrew the screws (to remove the wheels you can turn a ratchet with a nozzle).
-inside Unscrew the four nuts that secure the bumper to the rear.
-with an assistant pull the corners to the sides and gently pulls the bumper back.
-remove connector from the PDC (if any).