Depending on the year of release of attachment is different.
-open the hood.
-under the hood, Unscrew the screws and take out the caps (twisted and inserted top to bottom) that secure the grille and the upper bumper section.
-on the perimeter in the bottom part Unscrew the screws and take out the caps.
-wrenched the wheel depending on which way we will analyse it first.
-wheel arches Unscrew three screws on each side and removed the fender liner.
-with the assistant release the latch in the wings (pull the corners apart).
-gently pulls the bumper itself.
-remove the connector from the fog lamp.
-remove connector from the PDC (if any).
-open the trunk lid.
-in the doorway pulls out ten caps.
-wheel arches Unscrew five screws on each side (to remove the wheels easier to turn a ratchet with a nozzle) that attach the fender liner.
-Unscrew the screws that secures the lower part (spun up).
-with the assistant release the latch in the wings (pull the corners away) and pulls the bumper back.
-snap together the connectors of electrical equipment.