-
-
-
Depending on the year of manufacture, the mounting points may differ.
Front bumper
The lower and upper parts of the bumper can be removed separately.
-open the hood.
-Unscrew three screws on each side and remove the headlights.
-in the wheel arches, we Unscrew the screws that fasten the undercarriage (the front part).
-(if any) is released from the locking pads of the wings of the bumper (pull towards you).
-in front of the radiator and in the opening of the headlights, we Unscrew the screws that attach the upper part of the bumper.
-pull out the pistons that attach the protection.
-Unscrew three screws on each side, which attach the corners of the bumper to the fenders.
-release from the latches and remove the upper part of the bumper.
-remove the connectors from the fog lights.
-Unscrew two nuts on each side, which attach the lower part of the bumper to the spars.
-with an assistant, we remove the lower part of the bumper forward.
Rear bumper
-pull out the license plate light bulbs.
-release the wiring harnesses.
-(if available) disconnect the Parking meter connectors.
-(if available) Unscrew the power connector of the trailer device.
-from the bottom side, we Unscrew three (two) nuts on each side, which attach the bumper to the body.
-with an assistant, we pull the bumper back.
English 
Italiano 
Français 
русский 
Deutsch 
Español