How to remove front and rear bumper Ford C-Max 1 (Focus) (2003-2010)

Depending on the year of release of attachment is different.

Front bumper

-open the hood.

-under the hood, Unscrew the screws and take out the clips that secure the grille and the upper bumper section.

-remove the grille and Unscrew the screws under it.

-if you have the headlight washers, pull the nozzle up and remove the lid.

-on the perimeter in the lower part and pull out the caps and Unscrew the screws.

-wrenched the wheel depending on which way we will analyse it first.

-in the wheel wells, Unscrew the screws and peel the fender liner.

-attach the fender liner to the side and Unscrew one screw on each side holding the bumper corners to the wings.

-with the assistant release the latch in the wings, and gently pulls the bumper itself.

-remove the connector from the fog lamp.

-remove connector from the PDC (if any).

Rear bumper

-open the trunk lid.

-from the opening hook and remove the reflectors (the reflectors).

-for reflectors Unscrew the screws.

-the perimeter in the bottom part Unscrew the screws holding the lower part.

-in the wheel wells, Unscrew the screws (to remove the wheels easier to turn a ratchet with a nozzle) that attach the fender liner.

- move the wing flaps to the side and Unscrew one nut on each side that secure the corners of the bumper.

-with the assistant pulls the bumper back.

-remove the connectors from the sensors (if any).

How to remove front and rear bumper Ford C-Max 2 (after 2010)