-
-
-
Depending on the year of manufacture, the attachment points may differ slightly.
Front bumper
-open the hood.
-under the hood, take out the nine rivets that attach the trim over the radiator grill.
-under the trim, Unscrew the seven screws that secure the top of the bumper and the radiator grill.
-Unscrew the screws and take out the caps from the bottom side (twisted and inserted from bottom to top).
-turn the wheels to the side.
-in the wheel arches, take out four pistons on each side, which secure the wheel arch liners and fender liners (front part).
-release the fenders from the bumper (they are held on the latches, pull towards ourselves).
-Unscrew three screws on each side that attach the sides of the bumper to the fenders (screws are difficult to access).
-release the clips in the wings (pull the corners of the bumper down and towards ourselves).
-with an assistant, we pull the bumper forward (we look behind the wires).
-disconnect the connectors of the electrical equipment.
Rear bumper
-open the trunk lid.
-take out the plugs and unscrew two screws from each groan that secure the taillights.
-remove the rear lights (held on to the clips).
-Unscrew the four screws in the trunk opening.
-in the wheel arches, take out four pistons on each side, which secure the wheel arch liners and fender liners (rear part).
-release the fenders from the bumper (they are held on the latches, pull towards ourselves).
-behind the overlays, Unscrew one screw on each side that secure the sides of the bumper to the fenders.
-Unscrew the screws and take out the rivets around the perimeter of the lower part of the bumper.
-release the latches in the wings (pull the corners of the bumper towards you).
-with an assistant, we pull the bumper back (look behind the wires).
-remove the connectors of electrical equipment.
English 
Italiano 
Français 
русский 
Deutsch 
Español