The attachment points may differ depending on the year of manufacture and the type of model.

Front bumper

-open the hood.

-under the hood, Unscrew the four screws that secure the top of the bumper.

-Around the perimeter of the lower part of the bumper, Unscrew the seven screws (twisted and inserted from bottom to top).

-wheel the wheels to the side.

-in the wheel arches, Unscrew two screws on each side that secure the wheel arch liners (front part) and the sides of the bumper.

-release the latches in the wings (pull the corners of the bumper towards you and down).

-with an assistant, we pull the bumper forward (look behind the wires).

-disconnect the connectors of the electrical equipment.

front bumper attachment points Ford Tourneo / Transit Connect (2013+)

Front bumper mounting diagram Ford Tourneo / Transit Connect (2013+)

Front bumper mounting diagram Ford Tourneo / Transit Connect (2013+)

 

Rear bumper

The lower and side parts of the bumper are removed separately, the lower part must be removed first.

-open the trunk lid.

-Unscrew the screws in the trunk opening.

-in the wheel arches, Unscrew the screws that secure the wheel arch liners (rear part) and the sides of the bumper.

-release the lower part of the bumper from the latches in the wings and, with an assistant, pull it back (look behind the wires).

-disconnect the connectors of the electrical equipment (if any).

-behind the wheel arch liners, Unscrew one screw on each side that secure the corners of the side parts of the bumper to the fenders.

-Unscrew the screws in the trunk opening.

-release the latches in the wings (pull the corners towards you) and remove the side parts of the bumper.

rear bumper attachment points Ford Tourneo / Transit Connect (2013+)

rear bumper attachment points Ford Tourneo / Transit Connect (2013+)

Rear bumper mounting diagram Ford Tourneo / Transit Connect (2013+)