-
-
-
The attachment points may differ depending on the year of manufacture.
Front bumper
-open the hood.
-under the hood, take out eight caps and remove the trim over the radiator grill.
-under the cover, unscrew the six screws (twisted from top to bottom).
-turn the wheels to the side.
-in the wheel arches, Unscrew six screws on each side that secure the wheel arch liners.
-Unscrew two screws on each side, release the connectors and remove the headlights up.
-Unscrew three screws on each side (twisted from top to bottom) that secure the sides of the bumper to the fenders.
-from the bottom side, unscrew ten screws (twisted from bottom to top) and take out two pistons.
-with an assistant, release the clips in the wings (pull the corners of the bumper down and towards ourselves).
-release the upper part of the bumper from the latches.
-with the assistant, we pull the bumper forward (we look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-Unscrew the nuts from the trunk and remove the taillights.
-from the bottom side, unscrew ten screws and take out the caps.
-in the wheel arches, Unscrew six screws on each side that secure the wheel arch liners and sides of the bumper.
-release the latches in the wings (pull the corners of the bumper towards you).
-release the latches under the rear lights.
-release the clips in the trunk opening (pull it towards you).
-with an assistant, we pull the bumper back (look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español