How to remove front and rear bumper Ford Ranger (2011-2015)
Depending on the year of manufacture, the attachment points may differ slightly.
Front bumper
-open the hood.
-under the hood, take out five caps and remove the trim over the radiator grill (the trim is fastened to the grill with latches, pull up).
-under the cover, take out two pistons and remove the radiator grill (the lower part of the grille is held on by the latches, pull the bottom of the grille towards you).
-under the grill, take out the rivets that secure the top of the bumper.
-Unscrew the four screws from the bottom side (screwed from bottom to top).
-wheel the wheels to the side.
-in the wheel arches, take out the rivets that secure the wheel arch liners (front part).
-we move the wheel arch liners to the side and unscrew one screw on each side that secure the sides to the fenders.
-release the latches in the wings (pull the corners of the bumper towards you).
-with an assistant, we pull the bumper forward (we look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español 
