-
-
-
The attachment points may differ depending on the year of manufacture and the type of model.
Front bumper
-open the hood.
-under the hood, Unscrew the four screws that secure the top of the bumper.
-Unscrew the screws along the perimeter of the lower part of the bumper (twisted from bottom to top).
-remove the license plate along with the frame, and unscrew the two screws behind them.
-Unscrew the two screws in the lower grille.
-turn the wheels to the side.
-in the wheel arches, Unscrew the screws that secure the wheel arch liners (front part).
-behind the wheel arch liners, Unscrew the screws that secure the sides of the bumper to the fenders.
-with an assistant, we pull the bumper forward (we look behind the wires).
-disconnect the connectors of the electrical equipment.
Rear bumper
The center and side parts of the bumper are removed separately, the center part must be removed first.
-open the trunk lid.
-Unscrew the screws (drill out the rivets) in the trunk opening.
-Unscrew the screws from the bottom side (twisted from bottom to top).
-remove the central part of the bumper towards ourselves.
-Unscrew the screws in the trunk opening.
-in the wheel arches, Unscrew the screws that secure the wheel arch liners (rear part) and the sides of the bumper.
-release the side parts of the bumper from the latches in the wings (pull it towards you).
-release the latches in the wings (pull the corners towards you) and remove the side parts of the bumper.
English 
Italiano 
Français 
русский 
Deutsch 
Español