Depending on the year of manufacture, the attachment points may differ slightly.
-open the hood.
-under the hood, take out five rivets that attach the trim over the radiator grill.
-remove the cover (fastened with latches, pull up).
-Unscrew two screws in the upper part of the radiator grill and two in the depth along the edges of the headlights (you need a 10 head with an extension cord).
-remove the radiator grill towards ourselves (it is held by the latches, we pull the bottom of the grille towards ourselves).
-under the grill, take out the four pistons that secure the top of the bumper.
-Unscrew the screws along the perimeter of the lower part of the bumper (twisted from bottom to top).
-turn the wheels to the side.
-in the wheel arches, take out three pistons on each side that secure the wheel arch liners (front part).
-we unscrew one screw on each side, which attach the sides to the wings (twisted from bottom to top).
-release the latches in the wings (pull the corners of the bumper towards you).
-with an assistant, we pull the bumper forward (we look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
-behind the bumper, disconnect the electrical connectors.
-from the bottom side, Unscrew the screws that secure the bumper amplifier brackets to the body.
-with the assistant, we pull the bumper back together with the amplifier.
How to remove front and rear bumper Ford Ranger (1998-2004)
How to remove front and rear bumper Ford Ranger (2004-2006)
How to remove front and rear bumper Ford Ranger (2007-2011)
How to remove front and rear bumper Ford Ranger (2011-2015)