How to remove front and rear bumper Ford Escape (2012-2019)
The attachment points may differ depending on the year of manufacture.
Front bumper
-open the hood.
-under the hood, take out the caps and remove the trim over the radiator grill.
-under the trim, unscrew the seven screws (spun from top to bottom) that secure the radiator grill and the upper part of the bumper.
- (if any) unscrew the two screws behind the radiator grill.
-turn the wheels to the side.
-in the wheel arches, Unscrew seven screws on each side that secure the wheel arch liners and fender liners.
-release the fenders from the bumper (they are held on the latches, pull towards ourselves).
-through the engine compartment, behind the headlights, unscrew three screws on each side (twisted from top to bottom) that secure the sides of the bumper to the fenders.
-from the bottom side, unscrew the screws that secure the front part of the engine protection.
-under the protection, unscrew the screws and take out the caps (twisted and inserted from the bottom up) that secure the lower part of the bumper.
-with an assistant, release the clips in the wings (pull the corners of the bumper down and towards ourselves).
-release the upper part of the bumper from the latches.
-with an assistant, we pull the bumper forward (look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español 
