Depending on body type and year of manufacture of the fixing points are different.
-open the hood.
-take out the four clips that secure the grille and the upper bumper section.
-under the car, Unscrew the screws around the perimeter at the bottom.
-wrenched the wheel depending on which way we will analyse it first.
-wheel arches take out the rivets that attach the fender liner.
-attach the fender liner to the side and Unscrew three screws on each side holding the bumper corners to the wings.
-with the assistant gently pulls the bumper itself.
-remove the connector from the fog lamp (if any).
-remove connector from the PDC (if any).
-open the trunk lid.
-in the opening, Unscrew one screw on each side.
-(depending on body type, the rear lights are different) Unscrew the screws in the opening of the trunk and nut behind the side trim.
-released from the latches and remove the tail lights.
-Unscrew one screw on each side under the rear lights (can be caps).
-Unscrew the screws and take out the pistons in the wheel arches (so as not to remove the wheels easier to turn a ratchet with a nozzle).
-Unscrew the screws (spun up) that secure the lower part.
-with the assistant release the latch in the wings, and gently pulls the bumper back.
-snap together the connectors of the equipment (if any).